stimag STL-H/SW, Инструкция по эксплуатации

Страница: 12 / 24

Page 1 of 13
Chapter 1 Introduction
Thank you for using our pallet truck. Your pallet truck is made of high quality steel and is
designed for the horizontal lifting and transport of loads on a pallet or standardized
containers on a level, fixed base. For your safety and correct operation, please carefully
read this instruction before using it.
NOTE: All of the information reported herein is based on data available at the moment of
printing. We reserve the right to modify our own products at any moment without notice
and incurring in any sanction. So, it is suggested to always verify possible updates.
Chapter 2 General Specifications
Capacity (kg) 2000 2500 3000
Max. Fork Height (mm) 200(or190)
Min. Fork Height (mm) 85(or75)
Fork Length (mm) 1100 / 1150 / 1220
Width Overall Forks (mm) 450 / 520 / 540 / 685
Individual Fork Width (mm) 160
Load WheelDiameter (mm) Ø 82x70(or Ø 74x70)Nylon, Polyurethane
Steering Wheel Diameter (mm) Ø 200(or Ø 180)Nylon, Polyurethane, Rubber
Special fork length are available 800, 900, 950, 1000, 1500, 2000mm.
Materials and specification are subject to change without notice.
Chapter 3 To Attach Draw-bar To Pump Unit
If you have purchased a wooden box of pallet truck, some assembly is required.
Certainly, you need some tools, a hammer, a pliers, a spanner, etc; and some parts, one
axle with hole (A105), two elastic pins (A106)(
Note one is in the axle (A105)) , these
parts are putted in a plastic bag, which is putted into the draw-bar.