© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved
State: 24.03.2017 p. 3
Mounting instruction climbing net „retis 1“
Item-No. 515515402
6. Arrange the sliding bars and plug it with the delivered connection pipes at the
ladder bow. Screw it with cheese head screws M8 x 25 from below.
7. Adjust the climbing equipment at the foundations.
8. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
9. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1700 mm.
Recommended surface material: sand, wood chip, gravel,
synth. fall protection.
10. After 3 months, check the screws at the joints and retighten them if
necessary.
11. Do not allow children to use the equipment before the installation has been
finished.
Attention:
If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE:
Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are fine to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
Diagram 4: Draufsicht mit Angabe des Sicherheitsfreiraums
3150
6950
OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
retis 1a
6950x3150
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev
Änderung
Datum
1:20
A3
Gewicht
Name
Name
Draufsicht
0905-00-00
123.4
Maßstab
Mattheis
07.03.17
