Still RX70 Series, Оригинальное руководство пользователя

Страница: 361 / 406

Maintenance
5
Remaining ready for operation
7341_003-058
3
2
1
4
Cleaning the pre-cleaner
– Loosen clamp (1) on pre-cleaner.
– Remove housing cover (2).
– Remove and empty dust container (3).
– Clean coarse contamination from lower part
of container (4).
– Re-attach dust container and secure with
clamp.
NOTE
Do not fill pre-cleaner with oil. Replace
damaged container parts.
7341_003-020
1
2
3
2
2
4
Cleaning the oil tank on the oil bath
air filter
WARNING
There is a risk of slipping on spilled oil, particularly
when combined with water!
The oil tank (4) is filled with oil.
– Carefully remove the oil tank.
– Collect spilt oil immediately using an oil binding
agent and dispose of in an environmentally
friendly way.
– Observe the safety information for handling oils,
see the "Oils" chapter.
– Release the four clamps (2) on the oil tank
and carefully remove the oil tank (1).
– Empty the oil tank and clean using degreas-
ing cleaning material.
ENVIRONMENT NOTE
Oils are water pollutants!
• Dispose of contaminated oil, oil sludge and
used cleaning material in an environmen-
tally friendly way.
– Fill the oil tank (4) to the level mark (3) with
engine oil.
For engine oil specifications, see the chapter
entitled "Maintenance data table".
57348011800 EN - 11/2018 349