Still RX70 Series, Оригинальное руководство пользователя

Страница: 106 / 406

4
Operation
Switching on and starting
6210_003-067_V2
2 1
Checking the vertical lift mast
position (variant) for correct function
NOTE
The function check of the lift mast vertical
position (variant) must be carried out every
time a truck is commissioned.
– Press the Softkey (1).
The comfort feature "lift mast vertical posi-
tion" is switched on. The symbol (2) is
displayed.
– Tilt the lift mast backwards.
The lift mast must tilt back fully and move
gently as far as the end stop.
– Tilt the lift mast forward.
The lift mast must tilt forwards and stop in the
vertical position.
– Release the operating device to tilt and
actuate again.
The lift mast must tilt forwards fully and move
gently as far as the end stop.
Switching on and starting
Switching on the key switch
WARNING
Before switching on the key switch, all tests prior
to commissioning must be performed without any
defects being detected.
– Carry out the checks and tasks that are to be
performed before daily use.
– Do not operate the truck if defects have been
detected.
– Notify the authorised service centre.
NOTE
If the steering is turned when switching on the
truck, the truck will travel more slowly. This
driving speed limitation is disabled as soon as
the truck is steered out of cornering to drive in
94 57348011800 EN - 11/2018