Still RCG15 Скачать руководство пользователя страница 27

Страница: 27 / 182

Safety regulations in case of accidental lateral tipping

If as a result of incorrect manoeuvring the

truck appears to be tipping over sideways,

carefully follow the instructions below:
a) Do not leave the forklift truck.
b) Tilt your head forward and move your body

in the opposite direction to which the forklift is

tipping.

c) Remain firmly seated, grip the steering

wheel and dig your heels in. Wait until the

truck has reached a stable position before

leaving the truck.

Commissioning of LPG-fuelled trucks

A - For use with "fixed bottle" that can

be filled by the user

In order to comply the safety requirements of

the ISO 3691 standard, the bottle must be

equipped with at least the following:

●

Manual shut-off tap;

●

Valve (2) as indicated in the previous point;

●

Overpressure valve;

●

Device for indicating the maximum level;

and it must be subjected to the tests provided

for by the regulations in force in the country in

which the truck is used.
This specific variant must be requested from

the manufacturer at the time the truck is or-

dered; if the set-up occurs at a later time, how-

ever, it is essential to use the original kit and

carry out the assembly as provided for by the

manufacturer.

B - For use with a “removable bottle”

The bottle must be:

●

Compliant with the requirements of ISO

3691 (valve (2) as indicated previously,

manual shut-off cock);

●

Suitable for safe use on vehicles designed

as indicated above;

●

Compliant with the requirements regarding

containers under pressure currently in force

in the country in which the truck is used;

●

Subjected to any tests provided for by the

requirements referred to above;

●

Accompanied by an appropriate card certi-

fying its origin.

When making the connection, check the com-

patibility of the pipe/bottle fittings and use ap-

propriate adapters if necessary.

NOTE

The person commissioning the truck is com-

pletely responsible for complying with the re-

quirements stated in points A and B above. In

this regard, it is advisable to always consult

specialists in the sector for the validation of

the equipment. It is advisable to use a remov-

able bottle equipped with overpressure valve.

The manufacturer assumes no responsibility

for:

●

Use of non-compliant tanks;

●

Incorrect installation of the same;

●

Commissioning of the truck without having

satisfied the safety regulations and laws in

force in the country in which the truck is

used.

DANGER

The leakage of liquid gas may cause freeze burns

and/or explosions. This can occur particularly in the

case of gas leaks from the system or when the en-

gine doesn't start or is difficult to start. Thus if these

anomalies should occur, it is strictly prohibited to

perform work on the gas system and it is strictly

prohibited to use the truck.

Safety

Safety regulations in case of accidental lateral tipping

60048011601 EN - 08/2020

Содержание RCG15























































































































































































Результаты поиска

Содержание RCG15

Отзывы:

Похожие инструкции для RCG15

Бренды по названию

Популярные бренды

Still RCG15, Оригинальное руководство пользователя

Результаты поиска

Содержание RCG15

Отзывы:

Похожие инструкции для RCG15

Бренды по названию

Популярные бренды