Still FXV 14 Скачать руководство пользователя

Страница: 82 / 174

DANGER

Do not rely on lift-off braking to stop the truck in an

emergency.
Always use the brake pedal in an emergency and

press the emergency off switch if necessary.

Braking by releasing the accelerator pedal

–

Push the drive switch and press the accel-

erator pedal (2) to move the truck forwards.

–

Release the accelerator pedal (2).

The truck brakes progressively until the truck

comes to a complete stop.
The driving controls are available.
Braking by reversing the drive direction

–

Push the drive switch and press the accel-

erator pedal (2) to move the truck forwards.

–

Push the drive switch in the opposite direc-

tion.

–

Keep the accelerator pedal (2) depressed.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.
The driving controls are available.

Progressive braking

The progressive brake is activated automati-

cally if one of the following conditions is met:

●

The operator presses the brake pedal (1)

●

The operator releases the operator pres-

ence button

●

The accelerator pedal is released

●

The operator presses the emergency off

switch

●

The power supply is cut off

WARNING

Risk of the operator being thrown from the truck
Activating the emergency off switch causes the truck

to stop suddenly.
It should only be used in the event of an emergency

and not for braking the truck under normal circum-

stances.

Use

Driving: Single-pedal option

11748011651 EN - 02/2021 - 06

Содержание FXV 14















































































































































































Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды

Still FXV 14, Оригинальное руководство пользователя

Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды