Still FXV 14 Скачать руководство пользователя

Страница: 70 / 174

Braking on the version without ped-

als

WARNING

The quality of the floor surface affects the braking

distance of the truck.
This should be taken into consideration when driving.

NOTE

Braking is progressive and increases as the

brake pedal is depressed.

Braking using the brake pedal

–

Push the joystick to move the truck for-

wards.

–

Press the brake pedal (1).

The truck brakes progressively until the truck

comes to a complete stop.
The driving controls are available.
Braking by releasing the joystick

DANGER

Do not rely on lift-off braking to stop the truck in an

emergency.
Always use the brake pedal in an emergency and

press the emergency off switch if necessary.

–

Push the joystick to move the truck for-

wards.

–

Release the joystick.

The truck brakes progressively until the truck

comes to a complete stop.
The driving controls are available.
Braking by reversing the drive direction

–

Push the joystick to move the truck for-

wards.

–

Push the joystick in the opposite direction.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.
The driving controls are available.



Use

Driving

11748011651 EN - 02/2021 - 06

Содержание FXV 14















































































































































































Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды

Still FXV 14, Оригинальное руководство пользователя

Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды