Still FXV 14 Скачать руководство пользователя

Страница: 111 / 174

Example of reading a display with the Dy-

namic Load Control (DLC) option version 3:

weight of the load slightly exceeded
The weight of the load on the forks is 1450 kg

(6). A tolerance of ± 50 kg applies. The dis-

played weight takes this into account.
The maximum authorised load (3) on the forks

is 1400 kg.
The maximum authorised height (1) is 3.3 m.
The measured lift height (4) is 2.9 m. The

weight of load on the forks exceeds the au-

thorised value for this height. The lift height is

lower than the maximum authorised height. A

warning beep sounds once and a yellow trian-

gle symbol (2) is shown on the display. The

measured weight flashes.
The arrow (5) points downwards only.
The operator must lower the forks and the

symbol disappears. However, lifting can con-

tinue in order to free a load.
There is a similar display when the measured

lift is greater than the authorised lift.
Example of reading a display with the Dy-

namic Load Control (DLC) option version 3:

weight of the load significantly exceeded
The weight of the load on the forks is 1600 kg

(6). A tolerance of ± 50 kg applies. The dis-

played weight takes this into account.
The maximum authorised load (3) on the forks

is 1400 kg.
The maximum authorised height for the maxi-

mum weight (1) is 3.3 m.
The measured lift height (4) is 2.9 m. The load

on the forks is too heavy. The lift height is low-

er than the maximum authorised height. Warn-

ing beeps sound and a red triangle symbol (2)

is shown on the display. The measured weight

flashes.
The arrow (5) points downwards only. Lifting is

then blocked.
The operator must lower the forks immediate-

ly. The symbol disappears and the beeps

stop.



Use

Driving assistance system: Dynamic Load Control

101

11748011651 EN - 02/2021 - 06

Содержание FXV 14















































































































































































Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды

Still FXV 14, Оригинальное руководство пользователя

Результаты поиска

Содержание FXV 14

Отзывы:

Похожие инструкции для FXV 14

Бренды по названию

Популярные бренды