Still EK-X10, Оригинальное руководство пользователя, Страница: 108 / 124

7
Special equipment
Electronic access control
Function
When the operator intends to take a passen-
ger, the relevant operating mode must be set
by turning the key switch to the correct symbol.
The passenger enters the cab and closes the
barrier. One or, if available, both foot switches
must be actuated. The passenger is required
to hold both handles and at the same time
press the coordination switch. The passenger
must adopt a position which does not impede
the operator.
Check
Before setting off, the equipment features
must be checked. In the passenger mode,
the truck must not permit any function unless
the coordination switch is actuated. If one of
the coordination switches is released during
a function, all functions must come to an
immediate stop.
Electronic access control
The operating panel controller is switched on
by pressing the button (1). The symbol (2)
appears in the display and asks for the 5-digit
PIN code programmed in the controller to be
entered using the keypad. If the PIN code
is entered correctly, the truck control unit is
switched on and the industrial truck is ready
for operation. If the PIN code is not entered
correctly, it must be entered again.
Defining the PIN code, changing the PIN
code
The PIN code can be changed so that each
industrial truck has an individual access code.
To do this, an authorised person can select the
required PIN code from a code list stored in the
controller. This coding process is covered in a
separate description.
Incorrect PIN code entry
If an incorrect PIN code is entered, the buzzer
will sound on the operating panel. If an
102 5212 804 3001 EN - 02/2017