Still ECV 10 Скачать руководство пользователя

Страница: 78 / 106

General maintenance information

General

The following instructions contain all the infor-

mation required for servicing your truck. Carry

out the various maintenance work in compli-

ance with the maintenance plan. This will en-

sure that your truck is reliable and in good

working order and that the warranty remains

valid.
Maintenance should only be carried out by au-

thorised technicians, or by authorised dealers

in accordance with a signed maintenance con-

tract.
Modifying or installing additional equipment on

the forklift truck is prohibited without the

agreement of the manufacturer.

NOTE

If the data plates or affixed labels are incom-

plete or damaged, they should be replaced

with new ones. For locations and reference

numbers, please see the spare parts cata-

logue.

CAUTION

If the forklift truck is used in an extreme environment

(such as excessive heat, excessive cold or areas

with high dust concentrations), the time intervals giv-

en in the maintenance tables should be reduced ac-

cordingly.

ENVIRONMENT NOTE

Please comply with regulations regarding the

use, handling and disposal of fuel and lubricat-

ing oil.

The forklift must undergo functional testing

and a trial run after each inspection.

Service plan

Maintenance work must be carried out accord-

ing to the maintenance checklist.
The service plan is followed by advice to facili-

tate work.
Maintenance intervals must be reduced if the

truck is used under harsh conditions (extreme

heat or extreme cold, large quantities of dust).

Grade and quantity of lubricants and

other consumables

Only lubricants and other consumables speci-

fied in these operating instructions are author-

ised for use during maintenance work.
Lubricants and other consumables required

for truck maintenance are listed in the mainte-

nance specifications table.
Never mix different qualities of grease or oil. If

it is absolutely necessary to change brands,

make sure to flush thoroughly beforehand.
Before changing any filters or working on the

hydraulic system, thoroughly clean the surface

and the areas around the part.
All containers used to pour oil must be clean.

Servicing and maintenance personnel training and qualification

Truck maintenance must only be carried out

by qualified and authorised personnel.
The annual inspection for prevention of acci-

dents at work must be carried out by a person

qualified to do so. The person carrying out this

inspection must provide their expertise and

opinion without being influenced by economic

factors or company internal issues. Safety is

the only critical deciding factor.
The person responsible for carrying out the in-

spection must have sufficient knowledge and

experience to be able to assess the condition

Maintenance

General maintenance information

50028011505 EN - 03/2022 - 06

Содержание ECV 10











































































































Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды

Still ECV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды