Still ECV 10 Скачать руководство пользователя

Страница: 64 / 106

Ramps must always be approached with great

caution:

●

Never attempt a slope with a gradient great-

er than that specified in the truck's data-

sheet

●

Make sure that the ground is clean and has

a non-slip surface, and that the route is

clear

Ascending slopes

Travel up slopes must always be in reverse,

with the load uphill.
Without a load, we recommend that you as-

cend slopes forwards.

Descending slopes

Travel down slopes must always be forwards,

with the load uphill.
Without a load, it is recommended that slopes

are descended forwards.
In all cases, you must travel at a very low

speed and brake very gradually.

DANGER

Risk to life and/or risk of serious damage to equip-

ment.
Never park the truck on a slope.Never make a U-turn

or take shortcuts on a slope.The driver must drive

very slowly on slopes.



Operation

Drive operations

50028011505 EN - 03/2022 - 06

Содержание ECV 10











































































































Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды

Still ECV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды