Still ECV 10 Скачать руководство пользователя

Страница: 69 / 106

–

To facilitate movement over obstacles, in-

crease the ground clearance.

–

Check that the width of the load is compati-

ble with the width of the aisle.

Setting a load down on the ground

–

Carefully move the load into the deposit

area.

–

Lower the load until the fork arms are free.

–

Move the forks straight back.

–

Lift the forks a few centimetres again.

CAUTION

Be careful not to touch nearby loads or those behind

the equipment.

CAUTION

Do not touch nearby loads or loads positioned be-

hind the equipment.

CAUTION

Before you remove the load, ensure that there are no

people in the vicinity.

Stacking a load

–

Carefully drive the machine to the required

location.

–

Raise the forks clearly above the level

where the load is to be placed.

–

Drive the truck forward into the racking.

–

Lower the load until the fork arms are free.

–

Move the forks straight back.

–

Lower the forks again until they are a few

centimetres away from the ground.

DANGER

Personnel must not stand under or near the truck

when the load is in the raised position.



Operation

Hydraulic operations

50028011505 EN - 03/2022 - 06

Содержание ECV 10











































































































Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды

Still ECV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание ECV 10

Отзывы:

Похожие инструкции для ECV 10

Бренды по названию

Популярные бренды