Still ECH 12C, Оригинальное руководство пользователя

Страница: 92 / 114

General Maintenance Information
Operational safety and environmental protection
●
You must carry out the checks and mainte-
nance operations outlined in this section at
the intervals set out in the service plan.
●
Modifying this truck, especially its safety de-
vices, is prohibited. You must not change
the work parameters of this truck.
●
Only original equipment meets with compa-
ny quality assurance requirements. To en-
sure the equipment’s stability and opera-
tional performance, you must only use origi-
nal equipment manufactured by our compa-
ny. You must handle old components and
replacement of fluids in accordance with
current environmental protection regula-
tions. Please contact our company’s cus-
tomer service department if you need to
change the oil.
●
Once you have completed checking and
servicing, you must check the alarm sys-
tem, emergency off switch and brake func-
tion. You must also lubricate in accordance
with maintenance schematics. Once you
have carried out these procedures, the
truck can be put into service again.
Repairs and maintenance safety regulations
Repairs and maintenance personnel
Maintenance and repairs on the truck should
only be carried out by qualified personnel who
are authorised by our company.
Lifting and jacking equipment
When lifting the truck, the lifting device can
only be installed on the fixed positions as
specified.
When jacking up the truck, appropriate tools
such as chocks and wooden blocks must be
used to secure the truck and prevent it from
accidentally rolling or tipping over.
When working under a raised load-bearing
component, sufficiently strong chains or safety
devices must be used to secure the forks.
WARNING
The battery connector must be disconnected before
the industrial truck is jacked up.
WARNING
Make sure that the industrial truck is only jacked up
on level surfaces, and is secured against rolling and
dropping.
Working on the electrical system
Work on the electrical system must be carried
out by professionally trained electricians.
Before commencing work, the operator must
take all necessary measures to prevent elec-
trical accidents.
If the truck is powered by a battery, the key
switch must be removed to prevent the truck
from being accidentally started.
Parameter regulations
When repairing and replacing hydraulics, elec-
tronics and electrical components, you must
pay special attention to comply with the truck’s
relevant parameter regulations.
Truck tyres
The quality of the tyres directly affects the sta-
bility and driving performance of the truck. If
you need to replace the tyres that were instal-
led in the factory, you must use original equip-
ment supplied by our company to meet the da-
ta indicators for the model list.
When replacing wheels or tyres, you must en-
sure that the truck will not tilt (for example, if
you replace left and right wheels at the same
time).
Maintenance
5
General Maintenance Information
84 5001 801 1532 EN - 10/2021 - 03