Still ECH 12C, Оригинальное руководство пользователя

Страница: 88 / 114

brake performance. You must also lubricate
the truck according to its maintenance sche-
matics.
Decommissioning and storing
If the truck is to be decommissioned for more
than 2 months, it must be parked in a frost-
free and dry location.
When storing the truck, it must be jacked up
so that all the wheels are clear of the ground.
This is the only way of ensuring that the
wheels and wheel bearings are not damaged.
If the storage period is longer than six months,
the user must contact the company's service
department to clarify other operational meas-
ures that need to be taken.
Precautions prior to storage
●
Clean the truck thoroughly.
●
Check the brakes.
●
Check the hydraulic oil level and top up if
required.
●
Apply a thin layer of lubricating oil or grease
to all unpainted mechanical components.
●
Lubricate according to the truck’s mainte-
nance schematic diagram.
●
Recharge the battery periodically.
●
Clean the battery and apply specialised
grease to the electrode bolts.
●
Spray all exposed contacts with a suitable
contact spray.
CAUTION
Charge the battery every month.
If the truck is driven by the battery, then the battery
must be charged every month to avoid depletion of
the battery through self-discharge, otherwise sulpha-
tion will destroy the battery.
Recommissioning after storage
●
Clean the truck thoroughly.
●
Lubricate according to the truck’s mainte-
nance schematic diagram.
●
Clean the battery, apply specialised grease
to the electrode studs, and install and fix the
terminals on the battery.
●
Recharge the battery.
●
Check whether the hydraulic oil contains
condensed water. Change the hydraulic oil
if necessary.
●
Check the alarm, emergency off switch and
brake performance.
●
Put the truck into service in accordance with
the operational manual’s instructions.
NOTE
If there are difficulties with operating electrical
system switches, you should apply contact
spray to the exposed contact surfaces and re-
move the oxide layers on the surfaces of the
operating component contacts by performing
repeated switch operations. After putting the
truck into service, the driver should immedi-
ately carry out repeated brake performance
tests.
Operation
4
Decommissioning and storing
80 5001 801 1532 EN - 10/2021 - 03