Still ECH 12C Скачать руководство пользователя страница 60

Страница: 60 / 114

Load handling

Picking up and storing goods

NOTE

Loads that are not positioned and secured in

accordance with the regulations pose an acci-

dent risk.

●

Instruct all personnel to vacate the truck’s

hazard area. If any person is located in the

hazard area, stop the truck immediately.

●

Only transport loads that have been posi-

tioned and secured in accordance with reg-

ulations. Adopt appropriate protective

measures if the load is at risk of tipping over

or falling during transport.

●

You must not transport goods using dam-

aged transportation tools (such as trucks,

pallets etc.).

●

Never go under raised load-bearing compo-

nents.

●

Personnel are prohibited from entering load

components.

●

You must not use the truck to lift personnel.

●

Try to move the forks until they are com-

pletely under the goods.

CAUTION

Before picking up a load, the operator must ensure

that it has been correctly stacked.
The weight of the load must not exceed the truck’s

rated load capacity.
Do not place long loads sideways across the forks.

Lifting

Operation

Load handling

5001 801 1532 EN - 10/2021 - 03

Содержание ECH 12C



















































































































Результаты поиска

Содержание ECH 12C

Отзывы:

Похожие инструкции для ECH 12C

Бренды по названию

Популярные бренды

Still ECH 12C, Оригинальное руководство пользователя

Результаты поиска

Содержание ECH 12C

Отзывы:

Похожие инструкции для ECH 12C

Бренды по названию

Популярные бренды