Stilevs Cays CM-16, Инструкция по эксплуатации

Страница: 11 / 16

11
switch.
• After boiling water in a short time,
the appliance switches to keep
warm function.
• Your boiled water will be ready
continuously, when the kettle is
hold in the this position.
• The boiling switch is pressed again
for ensuring boiling in a short period
when the water is added.
CLEANING & MAINTENANCE
• Unplug the tea maker from the
power supply. You can use detergent
to clean up the tea maker if it is too
dirty. Otherwise boiled water.
• DO NOT DIP your tea maker into the
water That cause electricity shock
hazard and break down your tea
maker.
• Even if there is bi-metal saver to
protect against over heating,.
• DO NOT TURN ON your tea maker
while there is no water in it.
• DO NOT WASH YOUR tea maker IN
THE DISHWASHER.
• Do not boil the milk in the brewing
pot. If you boil the milk in the
brewing pot, it sticks on heating
element and makes a black layer
that can only be cleaned by steel
wool. So we do not recommend to
be put milk into the brewing pot.
keep this unit plugged in the kitchen
when not in use, provided that the
switch is turned off “0”.
• Fill the kettle with water between the
maximum level and the minimum
level, according to the quantity of
tea you want to steep.
• Place the kettle over the power base
unit.
• Open the teapot lid, take out the
tea filter from şits place, put an
adequate amount of tea in the filter
and locate it inside of the teapot
after wetting it with cold water
(usually one serving spoon of black
tea per person).
• Open by taking the main switch to
“on” and press the boiling switch.
The red pilot light will be on and the
water will start heating.
• Depending upon the quantity of
water put into the kettle, the water
will boil within 3 to 8 minutes,
boiling switch willass automatically
to the closed position and it will
decrease the heating power to keep
the water boiling at the minimum
level. Meanwhile the red pilot light
will go out and the green pilot light
will be on.
• Steep the tea using boiled water
and relocate the teapot in its place.
Add some water to the kettle if
necessary. If you add water, press
the boiling switch again.
Heating Water:
• You can use the tea maker for the
purpose of heating and boiling
water also, if required.
• After filling with water between the
minimum and maximum level, place
the kettle onto the power base unit,
put on the lid of the kettel, open the
main switch and press the boiling