Stilevs Cays CM-16, Инструкция по эксплуатации

Страница: 10 / 16

10
PRODUCT DESCRIPTIONS
1. Glass teapot
2. Stainless steel tea filter
3. Teapot lid
4. Kettle
5. Stainless steel water filter
6a. On/Off button
6b. Boiling / Keep warm button
7a. Pilot light for boiling (red)
7b. Pilot light for keeping warm (green)
8. Kettle lid
9. Power unit (heating table)
10. Power unit connector
USAGING THE APPLIANCE
• Tea maker is very practical appliance
designed to steep classical black
tea.
• Your appliance boils the water
within a short period of time and
switches automatically to keep
warm function, decreasing the
energy consumption at a rate of
%80.
• The keep warm function allows
you to keep the water boiling at
a minimum energy level, thus not
only preventing unnecessarry
vaporization, but also ensuring to
keep the tea contained in the teapot
hot on a continuous basis and to
provide energy saving.
• As soos as the water in the kettle
starts boiling, the appliance
switches automatically to keep
warm function in order to keep the
temperature of water stable.
• You can also use this appliance as
a kettle thanks to the special kettle
lid.
• The switch must be in the position
“0” when the kettle is empty or when
not in use.
Warning:
• DO NOT turn the switch on when the
kettle is empty or the water level is
below the minimum level of 0,5 liter.
• The switch must be turned off when
the water contained in the kettle is
completely finished.
Using Tea Maker:
• Tea maker heats up during operation:
for this reason, do not touch the
hot surfaces of the appliance. Keep
your hands away from the the spout
when the water starts boiling.
• Do not use for any purpose other
than boiling water. Do not fill with
any other liquids or solutions.
• Before using the first time, wash the
inside of your tea maker by putting
water inside. Boil water two or three
times inside the kettle and replace
the water after each boiling. Make
sure that device is filled with water
up to the maximum when doing this.
After each boiling, pour out the hot
water and rinse the inside of the
device with cold water.
Filling with Water:
• ALWAYS remove the appliance from
its power base unit when filling with
water, to prevent the water to be
spilled out on the power base.
• Do not fill with less than 0,5 liter of
water or more than 1,7 liter of water.
• If you attempt to boil a qantity of
water below the minimum level
or above the maximum level, the
appliance may switch off rather
early or the boiling water may eject
from the spout, respectively.
Steeping Tea:
• Unwind the power coiled around the
power base unşit of the appliance
and connect to a grounded socket.
• It would be convenient for you to