background image

SP-KM

English

11

Alternative method of starting

N

Make sure you have a safe and 

secure footing.

N

Hold the powerhead firmly with your 

left hand on the fan housing – your 

thumb should be under the fan 

housing.

WARNING

The rakes may begin to run as soon as 

the engine starts. For this reason, blip 

the throttle after starting – the engine 

returns to idling speed.
The starting procedure is now as 

described in the instruction manual of 

the KombiEngine or basic power tool 

you are using.

Stopping the Engine

N

See KombiEngine or basic power 

tool instruction manual.

For periods of 3 months or longer

N

Clean the rakes and tines and check 

them for damage

N

If the KombiTool is removed from 

the KombiEngine and stored 

separately:  Fit the protective cap on 

the drive tube to avoid dirt getting 

into the coupling.

N

Store the machine in a dry, high or 

locked location, out of the reach of 

children and other unauthorized 

persons.

Replacing tines

The unit comes standard with 10 tines of 

which two are intended for machine 

maintenance. A set of 4 tines is available 

as a special accessory – for part number 

see "Special Accessories".

N

Broken, badly worn and missing 

tines must be replaced immediately 

with new tines.

414BA014 KN

Storing the Machine

Inspection and Maintenance 

by User

414BA010 KN

Содержание SP-KM





















Отзывы: