0478-131-3052-A
74
English
22 Troubleshooting Guide
0302 – Drive motor fault
Temperature range
exceeded
Temperature in left drive motor too high.
► Allow the robotic mower to cool down.
0305 – Drive motor fault
Left wheel is stuck
Overload at left drive wheel.
► Clean the robotic mower.
► Level out any uneven areas (holes,
depressions) in the mowing area.
0402 – Drive motor fault
Temperature range
exceeded
Temperature in right drive motor too high.
► Allow the robotic mower to cool down.
0405 – Drive motor fault
Right wheel is stuck
Overload at right drive wheel.
► Clean the robotic mower.
► Level out any uneven areas (holes,
depressions) in the mowing area.
0502 – Mowing motor
fault
Temperature range
exceeded
Temperature in mowing motor too high.
► Allow the robotic mower to cool down
0505 – Mowing motor
fault
Mowing blade blocked
– Dirt between carrier plate and mowing deck
housing.
– Mowing motor cannot be switched on.
– Mowing motor overloaded.
► Clean mowing blade and mowing deck.
► Clean carrier plate.
► Set higher cutting height.
► Level out any uneven areas (holes,
depressions) in the mowing area.
0701 – Battery
temperature
Outside temperature
range
Temperature in battery too low or too high.
► Allow the robotic mower to warm up or cool
down.
0703 – Battery
discharged
See message 0100.
► See message 0100.
0704 – Battery
discharged
See message 0100.
► See message 0100.
1000 – Rollover
Too steep of slope
Tilt sensor has detected a rollover.
► Place the robotic mower on its wheels, check
for damage and confirm the message by
pressing the OK button.
1010 – iMow raised
Press OK to release
Robotic mower has been lifted by the hood.
► Check the movement of the hood and confirm
the message by pressing the OK button.
Message
Possible Cause
Remedy
