Stihl RME 443, Инструкция по эксплуатации

Страница: 50 / 262

0478 121 9921 A - EN
48
1 8. 1 REACH
REACH is an EC Directive for the
registration, evaluation, authorisation and
restriction of chemicals.
Information on compliance with the
REACH Directive (EC) No. 1907/2006 is
available from www.stihl.com/reach.
Fault:
Motor does not start
Possible cause:
– No mains voltage
– Connection cable, plug, plug connector
or switch defective
– Start button not pressed
– Motor is overloaded because the grass
is too tall or too wet
– Motor overload protection activated
– Mower housing is blocked
– Fuse in plug faulty (GB version)
Remedy:
– Check fuse ( Ö 11.1)
– Check cable/plug/switch and replace if
necessary ( Ö 11.1)
– Press start button (
Ö
11.3)
– Do not switch on motor in high grass,
adapt cutting height ( Ö 8.4)
– Allow machine to cool down ( Ö 9.4)
– Clean mower housing ( Ö 12.2)
– Replace fuse in plug (
#
)
Fault:
Frequently tripped mains fuse
Possible cause:
– Unsuitable electric cable
– Power overload
– Machine is overloaded due to mowing
grass which is too long or too wet
Remedy:
– Use suitable electric cable ( Ö 11.1)
– Connect machine to another circuit
– Adapt cutting height and mowing speed
to mowing conditions ( Ö 8.4)
Fault:
Excessive vibration during operation
Possible cause:
– Blade fastening screw is loose
– Blade is not balanced
Remedy:
– Tighten blade fastening screw (
Ö
12.6)
– Re-sharpen (balance) or replace blade
( Ö 12.7)
Fault:
Poor cut, lawn turning yellow
Possible cause:
– Mowing blade is blunt or worn,
– Rate of feed is too high in relation to the
cutting height
Remedy:
– Re-sharpen or replace mowing blade
( Ö 12.7)
– Reduce rate of feed and/or select
correct cutting height ( Ö 8.4)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
82 dB(A)
Uncertainty K
pA
2 dB(A)
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
1.40 m/sec²
Uncertainty K
hw
0.70 m/sec²
Measurement in accordance with
EN 20643
L/W/H:
138/49/107 cm
Weight: 20 kg
Weight (Great Brit-
ain only):
21 kg
RME 443.0 C:
In accordance with Directive 2000/14/EC:
Guaranteed sound
power level L
WAd
: 96 dB(A)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
82 dB(A)
Uncertainty K
pA
2 dB(A)
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
1.30 m/sec²
Uncertainty K
hw
0.65 m/sec²
Measurement in accordance with
EN 20643
L/W/H:
138/49/108 cm
Weight: 22 kg
RME 443.0:
1 9. Troubleshooting
#
If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.