Stihl KombiEngine KM 56 R, Инструкция по эксплуатации

Страница: 19 / 76

KM 56 R, KM 56 RC
English
17
Checking for proper closure
N
The lug on the grip must engage
entirely in the recess (arrow), and
the grip must lie completely flush
with the top of the cap.
N
Grip the cap and check for
tightness.
N
If the cap can be moved, it is not
properly installed.
Misalignment of the cap parts
N
If the cap does not drop fully into the
opening when the positioning marks
line up and/or if the cap does not
tighten properly when twisted, the
base of the cap may be rotated out
of position vis-à-vis the top.
N
Such misalignment can result from
handling, cleaning or an improper
attempt at tightening.
N
To correct a misalignment, turn the
cap (with the grip up) until it drops
fully into the tank opening.
N
Twist the cap counterclockwise as
far as it will go (approx. 1/4 turn) –
this will twist the base of the cap into
the correct position.
N
Twist the cap clockwise, closing it
normally – see the sections
"Closing" and "Checking for proper
closure."
N
If your cap still does not tighten
properly, it may be damaged or
broken; immediately stop use of the
unit and take it to your authorized
STIHL dealer for repair.
Opening the threaded filler cap
N
Turn the cap counterclockwise until
it can be removed from the tank
opening.
N
Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
N
Position cap.
N
Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
001BA223 KN
001BA225 KN
Left: Base of improperly aligned
cap (with open space)
Right: Base of cap correctly posi -
tioned for installation
001BA227 KN
001BA226 KN
002BA447 KN
002BA448 KN