Stihl KombiEngine KM 56 R, Инструкция по эксплуатации

Страница: 15 / 76

KM 56 R, KM 56 RC
English
13
Using the Barrier Bar
The barrier bar comes standard with the
machine and must be mounted to the
loop handle.
Mounting the Barrier Bar
N
Take out the screws (1) and remove
along with washers (2) and nuts (3).
N
Remove the loop handle (4) and
clamps (5).
N
Fit the square nuts (1) in the barrier
bar (2); the holes must line up.
N
Place the clamp (3) in the loop
handle (4) and position them both
against the drive tube (5).
N
Place the clamp (6) against the
drive tube.
N
Place the barrier bar (2) in position
as shown.
N
Line up the holes.
N
Insert the screws (7) in the holes
and screw them into the barrier
bar (2) as far as stop.
N
Go to "Adjusting and Securing the
Loop Handle".
Leave the barrier bar permanently
mounted to the loop handle.
002BA587 KN
4
002BA588 KN
3
5
3
5
1
2
1
2
2
002BA098 KN
1
1
5
2
4
002BA589 KN
3
6
7
7