Stihl KombiEngine KM 56 R, Инструкция по эксплуатации

Страница: 14 / 76

KM 56 R, KM 56 RC
English
12
The loop handle comes in two different
versions.
Version A
A factory-new machine comes with the
loop handle already mounted.
Using the Barrier Bar
The barrier bar comes standard with the
machine and must be mounted to the
loop handle.
Mounting the Barrier Bar
N
Fit the washer (1) on the M5x23
screw (2).
N
Hold the barrier bar (3) against the
loop handle and insert the screw
with washer.
N
Tighten down the screw (2) firmly.
Leave the barrier bar permanently
mounted to the loop handle.
Line up the loop handle.
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
N
Loosen the screw on the handle.
N
Slide the handle to the required
position.
N
Tighten down the screw so that the
handle cannot be rotated on the
drive tube.
Version B
A factory-new machine comes with the
loop handle already mounted.
Mounting the Loop Handle
540BA003 KN
540BA004 KN
540BA008 KN
1
2
3
(5,3 mm)
0.2 in
540BA006 KN
A
002BA586 KN