![background image](http://html1.mh-extra.com/html/stihl/ht-105/ht-105_instruction-manual_1379545032.webp)
HT 105, HT 134, HT 135
English
30
N
Use resistor type spark plugs with a
properly tightened adapter nut.
Installing the Spark Plug
N
Screw the spark plug (3) into the
cylinder.
N
Tighten down the spark plug (3) with
the combination wrench.
N
Press the boot (2) firmly onto the
spark plug.
N
Fit the cover (1) and screw it down
firmly.
For periods of 3 months or longer
N
Drain and clean the fuel tank in a
well ventilated area.
N
Dispose of fuel properly in
accordance with local
environmental requirements.
N
Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
N
Remove the saw chain and guide
bar, clean them and spray with
corrosion inhibiting oil.
N
Thoroughly clean the machine – pay
special attention to the cylinder fins
and air filter.
N
If you use a biological chain and bar
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
N
Store the machine in a dry, high or
locked location, out of the reach of
children and other unauthorized
persons.
N
Remove chain sprocket cover, saw
chain and guide bar
Replace the chain sprocket
–
replace after using two saw chains
or sooner
–
if the wear marks (a) are deeper
than 0.02 in (0.5 mm) since this
would reduce the service life of the
saw chain. Use a gauge (special
accessory) to check the depth of the
wear marks
Using two saw chains in alternation
helps preserve the chain sprocket.
STIHL recommends the use of original
STIHL chain sprockets.
Storing the Machine
Checking and Replacing the
Chain Sprocket
a
000BA054 KN
Содержание HT 105
