4
English
HSE 60, HSE 70
11. Extension Cord – Make sure your
extension cord is in good condition.
When using an extension cord, be
sure to use one heavy enough to
carry the current your product will
draw. An undersized extension cord
will cause a drop in line voltage
resulting in loss of power and
overheating. Table below shows the
correct size to use depending on
cord length and nameplate ampere
rating.
If in doubt, use the next heavier
gauge. The smaller the gauge
number, the heavier the cord.
Appropriate extension cords are
available in specialty stores for electrical
equipment or from your STIHL dealer.
To reduce the risk of disconnection of
hedge trimmer cord from the extension
cord during operating and to relieve
strain on the hedge trimmer cord:
:
Insert unit's plug
(1)
into extension
cord coupling
(2)
.
:
Make a loop
(3)
in the extension
cord and pass it through the
opening
(4)
.
:
Slip the loop over the strain relief
hook
(5)
and pull it tight. Secure
cord in position with cord lock
lever (
6
).
Minimum wire gauge for extension
cords for 120 Volt appliances using
0 - 6 amps
For ampere rating of this appliance see
“Specifications“
Cord length (ft)
25
50 100 150
Wire size (AWG) 18
16 16 14
2
1
446BA001 KN
3
6
5
4
446BA002 KN
All manuals and user guides at all-guides.com
