Stihl GHE 355, Инструкция по эксплуатации

Страница: 56 / 580

0478 201 9914 E - EN
54
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel).
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Blade disc assembly
6011 700 5100
Combination blade
6011 702 5100
Wing blade 1
6011 702 0300
Wing blade 2
6011 702 0310
Wing blade 3
6011 702 0320
Set of shredding blades
6011 007 1000
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately and in
an environmentally friendly manner,
recyclable waste can be re-used. For this
reason, the machine should be disposed
of for recycling at the end of its useful life.
Improper disposal may be harmful to
health and pollute the environment.
1 5. 1 Disposal
Render the machine unusable prior to
disposal.
In particular, remove the power cable and
electric cable to the motor for this purpose.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
1 6. 1 EU declaration of conformity –
STIHL GHE 355.0, GHE 375.0 garden
shredder
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: electric garden shredder
– manufacturer's brand: STIHL
– type: GHE 355.0, GHE 375.0
– power input, GHE 355.0: 2500 W
– power input, GHE 355.0 (GB/CH): 2000
W
– power input, GHE 375.0: 3000 W
– serial number: 6011
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 60335-1, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-
3 as well as for
– GHE 355.0: EN 50434
– GHE 375.0: EN ISO 12100 with
reference to EN 50434.
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix V.
1 4. Standard spare parts
1 5. Environmental protection 1 6. Declaration of conformity