FS 90, FS 90 R
English
23
Some machine versions are equipped
with a throttle cable adjuster on the
control handle.
A properly adjusted throttle cable is the
precondition for correct operation in the
full throttle, starting throttle and idle
positions.
Adjust the throttle cable only after the
unit is fully assembled – the control
handle must be in the normal operating
position.
N
Use a suitable tool to push the slide
to the end of the slot (see
illustration).
N
Press down the throttle trigger
lockout (1) and squeeze the throttle
trigger (2) (full throttle) – this sets
the throttle cable correctly.
The carrying ring comes standard with
the machine or is available as a special
accessory.
For position of carrying ring see "Main
Parts".
N
Place the clamp (1) against the
drive tube with the tapped hole on
the left (viewed from engine).
N
Squeeze the two ends of the clamp
together and hold in that position.
N
Insert the M6x14 screw (2).
N
Line up the carrying ring.
N
Tighten down the screw firmly.
Mounting the Deflector
1
Deflector for mowing attachments
2
Deflector for mowing heads
Deflectors (1 and 2) are both mounted to
the gearbox in the same way.
N
Place the deflector on the gearbox
flange.
N
Insert the screws (3) and tighten
them down firmly.
Adjusting the Throttle Cable
002BA163 KN
STOP
249BA017 KN
1
2
Fitting the Carrying Ring
002BA142 KN
1
2
1
Mounting the Deflector
002BA380 KN
2
1
3
3
Содержание FS 90
Страница 2: ...Instruction Manual 1 53 Manual de instrucciones 54 111...
Страница 114: ...FS 90 FS 90 R espa ol EE UU 112...
Страница 115: ......