Stihl FC 70, Инструкция по эксплуатации

Страница: 28 / 88

FC 70 C
English
26
Have the worn wheel replaced by a
specialist dealer. STIHL recommends
that maintenance and repair work be
carried out only by authorized STIHL
dealers.
Wheel
N
End of screw thread (1) is deformed
so that the wingnut (2) cannot be
lost
The wingnut can only be unscrewed
from the screw with lots of force. If the
parts are joined again after this, the
function of the "filler cap retainer" is no
longer assured. In this case, have the
screw and wingnut replaced with new
ones by a specialist dealer.
Removing the skirt
N
Undo and remove the screw (1).
N
Remove the washer (2)
N
Pull the skirt (3) out of the
segment (6) and out of the gap (5) in
the deflector
Fitting the skirt
N
In order to push the skirt easily into
the gap on the deflector, apply a thin
coating of resin-free oil to the top of
the skirt
N
Thread the skirt (3) into the
segment (6) and push into the
gap (5) of the deflector – the bore in
the skirt must be fixed in the
arbor (4)
N
Place washer (2) onto screw (1).
N
Insert and tighten the screw (1)
Replacing the Depth Wheel
1
239BA023 KN
2
Replacing the Skirt
3
239BA024 KN
1
4
5
6
2
6
4
5
2 1
239BA025 KN
3