17
FC 110
English / USA
:
Position blade (
7
) on the thrust
plate (
8
).
Collar
(see arrow)
must engage
hole in blade!
:
Fit thrust washer (
4
) on the drive
shaft (
9
).
:
Block the drive shaft.
:
Insert screw (
12
) with plain washer
(
10
) and retaining ring (
11
) in shaft
counterclockwise and tighten down
firmly.
The
STIHL 4-MIX engine
features gas
oil lubrication and must be run on a
fuel
mixture
of gasoline and engine oil.
It operates otherwise on the 4-stroke
principle.
This engine is certified to operate on
unleaded gasoline and the STIHL two-
stroke engine oil at a mix ratio of 50:1.
Your engine requires a mixture of high-
quality gasoline and quality two-stroke
air cooled engine oil.
Use mid-grade unleaded gasoline with a
minimum octane rating of 89 (R+M/2). If
the octane rating of the mid-grade
gasoline in your area is lower, use
premium unleaded fuel.
Fuel with a lower octane rating may
increase engine temperatures. This, in
turn, increases the risk of piston seizure
and damage to the engine.
The chemical composition of the fuel is
also important. Some fuel additives not
only detrimentally affect elastomers
(carburetor diaphragms, oil seals, fuel
lines, etc.), but magnesium castings and
catalytic converters as well. This could
cause running problems or even
damage the engine. For this reason
STIHL recommends that you use only
nationally recognized high-quality
unleaded gasoline!
8
4
7
406BA006 KN
9
10
11
12
7
4-MIX Engine
Fuel