Stihl Cutquik TS 410, Инструкция по эксплуатации

Страница: 36 / 96

TS 410, TS 420
English
34
N
Unscrew the nuts (1)
N
Remove the starter cover (5)
N
Do not remove the "cast arm and
guard" (6) – hold it in place on the
studs until the starter cover is fitted
back in position
N
Remove the defective V - belt
N
Carefully insert the new V - belt (7)
on the V - belt pulley (8) on the
engine and the front V
-
belt
pulley (9)
NOTICE
The belt action must run smoothly.
N
Fit the starter cover (5) over the
studs (10)
N
Tighten up the nuts (1) by hand
N
Push the V - belt guard (4) into place
N
Screw in the bolt (3) and tighten up
N
Insert the water hose into the guide
in the V - belt guard (arrow) from the
shut-off cock towards the guard –
avoid tight radiuses
Continue as described in the chapter
“Tensioning the V - belt”.
The cut-off machine can be mounted on
the STIHL cut-off machine cart FW 20
(special accessory) in a few easy steps.
The cut-off machine cart makes it easier
to
–
repair damaged roadways
–
apply roadway markings
–
cut expansion joints
6
370BA062 KN
1
5
1
1
7
8
370BA063 KN
9
10
1
10
10
370BA064 KN
1
5
1
4
3
370BA065 KN
Cut-off Machine Cart
1307BA027 KN