Stihl Cutquik TS 410, Инструкция по эксплуатации

Страница: 17 / 96

TS 410, TS 420
English
15
Types:
–
for dry applications
–
for wet applications
The proper selection and use of
composite resin cutting wheels ensures
economical use and avoids accelerated
wear. The product code which appears
–
on the label and
–
on the packaging (table with
recommendations for use) is an aid
to selection
STIHL composite resin cutting wheels
are suitable, depending on the version,
for cutting the following materials:
–
Asphalt
–
Concrete
–
Stone
–
Ductile cast iron pipes
–
Steel; STIHL composite resin
cutting wheels are not suitable for
cutting railway tracks
Do not cut any other materials – risk of
accident!
For wet applications.
The proper selection and use of
diamond abrasive wheels ensures
economical use and avoids accelerated
wear. The product code which appears
–
on the label and
–
on the packaging (table with
recommendations for use) is an aid
to selection
STIHL diamond abrasive wheels are
suitable, depending on the version, for
cutting the following materials:
–
Asphalt
–
Concrete
–
Stone (hard stone)
–
Abrasive concrete
–
Fresh concrete
–
Clay brick
–
Clay pipe
–
Ductile cast iron pipe
Do not cut any other materials – Risk of
accident!
Never use diamond abrasive wheels
with side plating as they jam in the cut
and can result in extreme kickback –
Risk of accident!
Product Codes
The product code is a combination of
letters and numbers, consisting of up to
four characters:
–
the letters denote the main field of
application of the abrasive wheel
–
the numbers denote the
performance class of the STIHL
diamond abrasive wheel
Axial and radial run-out
A faultless spindle bearing of the cut-off
machine is necessary for a long service
life and efficient functioning of the
diamond abrasive wheel.
Using the abrasive wheel on a cut-off
machine with a faulty spindle bearing
can lead to deviations in radial and axial
run-out.
Composite Abrasive Wheels Diamond Abrasive Wheels
0000-GXX-1235-A0
D-B10