manualshive.com logo in svg
background image

BT 45

English

3

and can result in loss of control or cause 

the handle to hit the operator or throw 

him to the ground, resulting in serious 

injury.

WARNING

Do not lend or rent your power tool 

without the instruction manual. Be sure 

that anyone using it understands the 

information contained in this manual.

WARNING

The use of this machine may be 

hazardous. If the drilling tool comes in 

contact with your body, it could cause 

impact or cut injuries.
Use your wood boring drill only for 

drilling wood. Use your planting auger 

only for mass flower plantings, small 

decorative posts, sign holes or deep 

road fertilization. For use in existing 

flower beds. Use your ice auger only for 

drilling holes in ice (with ice auger 

attachments).

WARNING

Do not use it for other purposes, since 

misuse may result in personal injury or 

property damage, including damage to 

the machine.

WARNING

Minors should never be allowed to use 

this power tool. Bystanders, especially 

children, and animals should not be 

allowed in the area where it is in use.

WARNING

To reduce the risk of injury to bystanders 

and damage to property, never let your 

power tool run unattended. When it is 

not in use (e.g. during a work break), 

shut it off and make sure that 

unauthorized persons do not use it.
Most of these safety precautions and 

warnings apply to the use of all STIHL 

power drills. Different models may have 

different parts and controls. See the 

appropriate section of your instruction 

manual for a description of the controls 

and the function of the parts of your 

model.
Safe use of a wood boring drill or a plant 

auger involves
1. the operator
2. the power tool
3. the use of the power tool.

THE OPERATOR

Physical Condition
You must be in good physical condition 

and mental health and not under the 

influence of any substance (drugs, 

alcohol, etc.) which might impair vision, 

dexterity or judgment. Do not operate 

this machine when you are fatigued.

WARNING

Be alert – if you get tired, take a break. 

Tiredness may result in loss of control. 

Working with any power tool can be 

strenuous. If you have any condition that 

might be aggravated by strenuous work, 

check with your doctor before operating 

this power tool.

WARNING

Prolonged use of a power tool (or other 

machines) exposing the operator to 

vibrations may produce whitefinger 

disease (Raynaud's phenomenon) or 

carpal tunnel syndrome.
These conditions reduce the hand's 

ability to feel and regulate temperature, 

produce numbness and burning 

sensations and may cause nerve and 

circulation damage and tissue necrosis.
All factors which contribute to 

whitefinger disease are not known, but 

cold weather, smoking and diseases or 

physical conditions that affect blood 

vessels and blood transport, as well as 

high vibration levels and long periods of 

exposure to vibration are mentioned as 

factors in the development of whitefinger 

disease. In order to reduce the risk of 

whitefinger disease and carpal tunnel 

syndrome, please note the following:

Содержание BT 45





















Отзывы: