background image

Contents

1

Guide to Using this Manual.........................2

2

Safety Precautions and Working Techni‐

ques............................................................ 2

3

Assembling the Unit.................................... 6

4

Adjusting the Throttle Cable........................7

5

Fitting the Harness......................................8

6

Fuel............................................................. 8

7

Fueling........................................................ 9

8

Information Before You Start...................... 9

9

Starting / Stopping the Engine.................. 10

10 Operating Instructions...............................12

11 Replacing the Air Filter..............................12

12 Adjusting the Carburetor........................... 13

13 Spark Plug................................................ 14

14 Engine Running Behavior......................... 14

15 Storing the Machine.................................. 15

16 Inspections and Maintenance by Dealer...15

17 Maintenance and Care..............................15

18 Main Parts.................................................17

19 Specifications............................................17

20 Maintenance and Repairs......................... 18

21 Disposal.................................................... 18

22 EC Declaration of Conformity................... 18

1

Guide to Using this Manual

1.1

Pictograms

The meanings of the pictograms attached to the

machine are explained in this manual.
Depending on the model concerned, the follow‐

ing pictograms may be attached to your

machine.

Fuel tank; fuel mixture of gasoline

and engine oil

Operate manual fuel pump

1.2

Symbols in text

WARNING

Warning where there is a risk of an accident or

personal injury or serious damage to property.

NOTICE

Caution where there is a risk of damaging the

machine or its individual components.

1.3

Engineering improvements

STIHL's philosophy is to continually improve all

of its products. For this reason we may modify

the design, engineering and appearance of our

products periodically.
Therefore, some changes, modifications and

improvements may not be covered in this man‐

ual.

2

Safety Precautions and

Working Techniques

Special safety precautions must be

observed when working with a power

tool.

It is important that you read the

instruction manual before first use

and keep it in a safe place for future

reference. Non-observance of the

instruction manual may result in seri‐

ous or even fatal injury.

Observe all applicable local safety regulations,

standards and ordinances.
If you have not used this model before: Have

your dealer or other experienced user show you

how it is operated or attend a special course in

its operation.
Minors should never be allowed to use this prod‐

uct.
Keep bystanders, especially children, and ani‐

mals away from the work area.
When the power tool is not in use, put it in a

place where it does not endanger others. Secure

it against unauthorized use.
The user is responsible for avoiding injury to third

parties or damage to their property.
Do not lend or rent your power tool without the

instruction manual. Be sure that anyone using

your power tool understands the information con‐

tained in this manual.

English

2

0458-456-8321-E

© ANDREAS STIHL AG & Co. KG 2022

0458-456-8321-E. VA0.D22.

Printed on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

Original Instruction Manual

0000009052_004_GB

Содержание BR 350





















Отзывы: