0009BA012 KN
H
LA
L
► Press the fuel pump bulb at least eight times –
even if the bulb is filled with fuel.
9.1.1
Cold engine (cold start)
0009BA013 KN
► Push the choke knob in and turn it to
c
.
9.1.2
Warm engine (warm start)
0009BA014 KN
► Push the choke knob in and turn it to
o
.
Also use this setting if the engine has been run‐
ning but is still cold.
9.1.3
Cranking
0009BA028 KN
► Place the unit securely on the ground and
make sure that bystanders are well clear of
the nozzle outlet.
► Make sure you have a firm footing: Hold the
unit with your left hand on the housing and put
one foot against the base plate to prevent it
slipping.
► Pull the starter grip slowly with your right hand
until you feel it engage and then give it a brisk
strong pull. Do not pull out the starter rope to
full length – it might otherwise break.
► Do not let the starter grip snap back. Guide it
slowly back into the housing so that the starter
rope can rewind properly.
► Continue cranking until the engine runs.
9.2
As soon as the engine runs
0009BA016 KN
9 Starting / Stopping the Engine
English
0458-456-8321-E
11
