manualshive.com logo in svg

Stihl BR 350, Инструкция по эксплуатации

Поделиться
Скачать
Stihl BR 350 Скачать руководство пользователя страница 8

5

Fitting the Harness

5.1

Adjusting the Harness

373BA003 KN

► Pull the straps downwards to tighten the har‐

ness

5.2

Loosening the Harness

373BA004 KN

► Lift the tabs of the two sliding adjusters.

► Adjust the harness so that the backplate fits

snugly and securely against your back

6

Fuel

The engine requires a mixture of gasoline and

engine oil.

WARNING

Avoid direct skin contact with fuel and breathing

in of gasoline fumes.

6.1

STIHL MotoMix

STIHL recommends using STIHL MotoMix. This

pre-blended fuel is free of benzene and lead, is

distinguished by a high octane rating, and

always provides the proper mixing ratio.
STIHL MotoMix uses STIHL HP Ultra two-stroke

engine oil for optimum engine life.
MotoMix is not available in all markets.

6.2

Mixing fuel

NOTICE

Unsuitable fuels or a mixing ratio that deviates

from the specification can lead to severe engine

damage. The engine, seals, fuel lines and fuel

tank may be damaged if low-quality gasoline or

engine oil is used.

6.2.1

Gasoline

Use only high-quality gasoline with an octane rat‐

ing of at least 90 ROC – leaded or unleaded.
Gasoline with an alcohol component exceeding

10% can cause impaired engine performance in

engines with manually adjustable carburetors

and thus should not be used in these engines.
Engines with M-Tronic deliver full engine per‐

formance using gasoline with an alcohol compo‐

nent of up to 27% (E27).
6.2.2

Engine oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil classified as JASO FB, JASO FC,

JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.
6.2.3

Mixing ratio

with STIHL two-stroke engine oil 1:50; 1:50 =

1 part oil + 50 parts gasoline
6.2.4

Examples

Quantity of gaso‐

line

STIHL two-stroke

engine oil 1:50

Liters

Liters

(ml)

1

0.02

(20)

5

0.10

(100)

10

0.20

(200)

15

0.30

(300)

20

0.40

(400)

25

0.50

(500)

► Pour oil into an approved safety fuel canister

first, then add gasoline and mix thoroughly

6.3

Storing fuel mixture

Store in approved safety fuel canisters only in a

dry, cool and secure place protected against light

and sunlight.

English

5 Fitting the Harness

8

0458-456-8321-E

Содержание BR 350





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды