17
GB/USA/CDN
145x202
145x202
5.2 Charging the Battery
WARNING
When charging the battery, only use a certified USB-C
cable and power supply. Use of a non-approved charger
may cause fire, explosion, leakage, and other hazards
which may also reduce the life time or performance of the
battery.
You can charge the headset by connecting the supplied
USB power & data cable into a computer’s USB port or
USB wall charger. It takes about 2.5 hours to be completely
charged.
NOTICE:
• Close the USB port after charging with a rubber cover
properly.
• When charging the battery, the blinking yellow and green
LED will alternate intermittently.
• When charging a fully charged battery, the blinking green
LED will appear in two patterns.
5.3 Switching On and Off the Headset
To switch on the headset, press and hold the Multi-function
Button for 2 seconds. You will hear ascending beeps and a
voice notification, “Hello”.
To switch off the headset, press and hold the Multi-function
Button for 2 seconds. You will hear descending beeps and
a voice notification, “Goodbye”.
NOTICE:
When switching on the headset, the Mesh
Intercom is automatically activated.
5.4 Checking the Battery Level
You can check the battery level when switching the
headset on or off. The battery condition is indicated by the
LED in the left earmuff.
• Blinking in green = High, 70-100%. You will hear a voice
notification, “Battery level is high”.
• Blinking slowly in yellow = Medium, 30-70%. You will hear a
voice notification, “Battery level is medium”.
• Blinking fast in red = Low, 0-30%. You will hear a voice
notification, “Battery level is low”.
NOTICE:
• The battery performance may be reduced over time with
usage.
• Battery life may vary depending on conditions,
environmental factors, functions of the product in use, and
devices used with it.
4. FITTING INSTRUCTIONS
4.1 ADVANCE ProCOM Headband Type
(G:1) Remove all hair under the earmuffs before putting
them on.
(G:2) Adjust the headband by extending the centre band
equally on both sides.
(G:3) Fit the earmuffs over your ears ensuring a tight fit
around your ears.
(G:4) Adjust the headband by sliding the headband up or
down to obtain a snug, comfortable fit.
(G:5) Ensure the earmuffs completely surround your ears.
Position the microphone close to your mouth.
(G:6) To remove the headset, ensure the earmuffs are in
the usage position and pull the earmuffs on both side to
remove the headset from your head.
4.2 ADVANCE ProCOM - with Adaptors for Function
Universal, ADVANCE X-Climb or ADVANCE Vent/X-Vent
(H:1) Remove all hair under the earmuffs before putting
them on.
(H:2) Place the helmet on your head with the earmuffs
in the stand-by position. Ensure the helmet is tight and
secure.
(H:3) Ensure the earmuffs completely cover your ears while
ensuring the helmet is on your head.
(H:4) Adjust the height of the earmuffs to ensure the
earmuffs completely surround your ears, giving a snug,
comfortable fit.
(H:5) Ensure that the earmuffs are firmly attached. Position
the microphone close to your mouth.
(H:6) To remove the helmet, ensure the earmuffs are in the
parking position and remove the helmet from your head.
5. GETTING STARTED
(See also Quick Start Guide)
5.1 Downloading Software
• ADVANCE ProCOM App
- Android: Google Play Store > ADVANCE ProCOM
- iOS: App Store > ADVANCE ProCOM
• STIHL Device Manager
The STIHL Device Manager allows you to upgrade
firmware and configure settings directly from your
PC. Download the STIHL Device Manager from
support.stihl.com.
• Firmware Upgrades
The headset supports firmware upgrades. You can upgrade
the firmware using the STIHL Device Manager. Please
visit support.stihl.com to check for the latest software
downloads.
UsersGuide_ADVANCE ProCOM.indb 17
UsersGuide_ADVANCE ProCOM.indb 17
2022-10-21 오후 1:15:39
2022-10-21 오후 1:15:39