Stiga ROYAL LINE 1171 HST Скачать руководство пользователя страница 8

59

 ENGLISH

EN

1 SYMBOLS

The following symbols appear on the machine. They are 
there to remind you of the care and attention required in use. 
This is what the symbols mean:

Warning.

Read and understand the owner’s manual 
before using this machine.

Remove the key, disconnect the spark 
plug wire, and consult technical literature 
before performing repairs or maintenance.

Danger - rotating fan.
Danger - rotating auger.
Keep hands out of discharge chute.
Keep hands and feet away from rotating 
parts.
Risk of burns.

Keep bystanders at a safe distance from 
the machine.
Never point the discharge chute towards 
bystanders.

Use hearing protection. 

2 SAFETY INSTRUCTIONS

2.1

GENERAL

Please read through these instructions carefully. Learn all 
the controls and the correct use of the machine.

Never allow children or anyone who is not familiar with 
these instructions to use the snow thrower. Local 
regulations may impose restrictions as regards the age of 
the driver.

Never use the machine if others, particularly children or 
animals, are in the vicinity. 

Remember that the driver is responsible for accidents that 
happen to other people or their property.

Be careful not to trip or fall, especially when reversing 
the machine.

Never use the snow thrower under the influence of 
alcohol or medication and if you are tired or ill.

2.2

PREPARATIONS

Check the area to be cleared and remove any loose or 
foreign objects.

Disengage all controls before starting the engine.

Never use the snow thrower unless properly dressed. 
Wear footwear that improves your grip on a slippery 
surface.

Warning – Petrol is highly inflammable. 
a. Always store petrol in containers that are made 
especially for this purpose.
b. Only fill or top up with petrol outdoors, and never 
smoke when filling or topping up.
c. Fill with petrol before starting the engine. Never 
remove the filler cap or fill with petrol while the engine 
is running or still warm.
d. Screw the filler cap on tightly and wipe up any spilt 
petrol.

Adjust the height of the auger housing to ensure it stays 
above gravel paths.

Never, under any circumstances, make adjustments while 
the engine is running (unless otherwise specified in the 
instructions).

Allow the snow thrower to adjust to the outdoor 
temperature before using it.

Always use protective goggles or a visor during use, 
maintenance and service. 

2.3

OPERATION

Keep hands and feet away from rotating parts. Always 
avoid the discharge chute opening.

Be careful when driving on or crossing gravel paths, 
pavements and roads. Be aware of hidden dangers and 
traffic.

Never direct the discharge chute towards a public road or 
traffic.

If the snow thrower hits a foreign object, stop the engine, 
disconnect the spark plug cable and carefully inspect the 
machine for damage. Repair the damage before using the 
machine again.

If the machine starts vibrating abnormally, stop the 
engine and look for the cause. Vibration is normally a 
sign of something wrong.

Stop the engine and disconnect the spark plug cable: 
a. If the machine steers away from the driving position. 
b. If the auger housing or discharge chute is blocked and 
must be cleaned. 
c. Before beginning repairs or adjustments.

Always make sure the rotating parts have stopped and all 
the controls are disengaged before cleaning, repairing or 
inspection.

Before leaving the machine unattended, disengage all the 
controls, put it into neutral gear, stop the engine and 
remove the ignition key. 

Never run the engine indoors except when taking it in and 
out of its place of storage. In this case ensure the door to 
the storage place is open. Exhaust fumes are toxic. 

Содержание ROYAL LINE 1171 HST



















Отзывы: