Stiga ROYAL LINE 1171 HST Скачать руководство пользователя страница 17

68

 ENGLISH

EN

7.11 HEADLAMP BULB

Only 27 W original spare part bulb is allowed to be 
used. Bulbs with higher power will damage the 
headlamp.

The headlamp bulb is fitted to the headlamp by a bayonet 
socket. See fig. 17. To replace the bulb proceed as follows:
1. Turn the bulb about 30° CCW and pull it out.
2. Release the plastic locks at each side of the bulb and pull 

off the cable connection from the bulb.

3. Fit the new bulb in the reverse order.

8 STORAGE

Never store the snow thrower with petrol in the 
tank in a confined area with bad ventilation. Petrol 
fumes could reach open flames, sparks, cigarettes 
etc.

If the snow thrower is to be stored for a longer period than 30 
days, the following measures are recommended:
1.  Empty the petrol tank.
2.  Start the engine and let it run until it stops due to lack of 

fuel.

3.  Change the engine oil if it has not been done for 3 

months.

4.  Remove the spark plug and empty a little engine oil 

(about 30ml) in the hole. Crank the engine a couple of 
times. Screw back the spark plug.

5. Clean the whole snow thrower thoroughly.
6. Lubricate all the parts as shown in LUBRICATING above.
7. Inspect the snow thrower for damage. Repair if necessary.
8. Touch up any paint damage.
9. Rust protect the metal surfaces.
10. Store the snow thrower indoors if possible. 

9 IF SOMETHING BREAKS

Authorised service workshops carry out repairs and 
guarantee service. Always use genuine spare parts.
Do you carry out simple repairs yourself? Always use 
genuine spare parts. They fit perfectly and make the work 
much easier. 
Spare parts are available at your retailer and service station.
When ordering spare parts: Specify the model, year of 
purchase, the engine model and type number.

10 PURCHASE TERMS

A full warranty is issued against manufacturing and material 
defects. The user must carefully follow the instructions given 
in the enclosed documentation.
Exceptions:
The warranty does not cover damage due to:
-

Neglect by the user to acquaint themselves with 
accompanying documentation

-

Carelessness 

-

Incorrect and non-permitted use or assembly

-

The use of non-genuine spare parts

-

The use of accessories not supplied or approved by GGP

Neither does the guarantee cover:
-

Wear parts such as drive belts, augers, headlights, wheels, 
shear bolts and wires

-

Normal wear

-

Engines. These are covered by the engine manufacturer’s 
warranties, with separate terms and conditions.

The purchaser is covered the national laws of each by each 
country. The rights to which the purchaser is entitled with the 
support of these laws are not restricted by this warranty.

Содержание ROYAL LINE 1171 HST



















Отзывы: