Stiga PR 500 Li 48, Руководство оператора, Страница: 40 / 47

EN - 18
11. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.
• Only authorised service centres can carry
out guaranteed repairs and maintenance.
• The authorised service centres only
use genuine spare parts. Genuine
spare parts and accessories have been
designed specifically for machines.
• Non-genuine spare parts and accessories
are not approved. Use of non-genuine
spare parts and accessories cause
the warranty to be invalidated.
• It is advisable to send your machine
once a year to an authorised service
centre for servicing, assistance
and safety device inspection.
12. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover
damages caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of accessories not supplied or
approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of consumables,
such as cutting means, safety bolts.
• Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
13. MAINTENANCE TABLE
Intervention Frequency Paragraph
First time And then after
every
MACHINE
Check all fasteners - Before each use 7.7
Safety checks/check controls - Before each use 6.2
Check the chain catcher - Before each use 7.5
General cleaning and inspection - After each use 7.4
Cleaning the chain - After each use 7.4.2
Check the machine and bar lubrication holes - Before each use 7.6
Check the chain brake metal band - Once a month 8.1 *
Check the chain drive sprocket - Once a month 8.2 *
Chain maintenance - - 8.3 *
Bar maintenance - - 8.4
Topping up the chain oil level - Before each use 7.3
* Interventions which must be carried out by your dealer or an authorised service centre