30
User’s manual
EN
USE AND OPERATION
OPERATING TIPS
– When using the robot for the fi rst time, it is recommended to carefully read
the entire manual and to fully understand it, especially the safety information.
– Only use the robot for the uses intended by the Manufacturer and do not
tamper with any device to obtain different operating performances
DESCRIPTION OF ROBOT COMMANDS
The illustration shows the position of the
commands on the machine.
A) DISPLAY:
it is lit up to display the functions.
B) ON:
press to start the mower.
C) START/PAUSE:
press to stop the mower,
leaving the display on “stand-by”; in this
way, the mower can be programmed.
Press again to restart the mower. If the key
is pressed while the mower is charging,
the mower does not resume working until
it is pressed again and the word “PAUSE”
disappears from the display.
"ON" KEY (B)
DISPLAY (A)
ENTER KEY (G)
7+,6.(<%2$5',621/<$1(;$03/(
OFF - STOP (E) KEY
CHARGE (D) KEY
"START/PAUSE" KEY (C)
"
–
" (H) KEY
"
+
" (F) KEY
D) CHARGE:
press this key to allow the mower to return to its station and, consequently,
to start recharging the batteries. If pressed while the robot is being charged, the robot
interrupts the charging cycle and starts operating again.
E) OFF/STOP:
press this key to stop the robot, the display turns off.
F) “+” KEY:
during operation, press this key to restart the blade. During programming, press
this key to increase the values proposed by the menu.
G) ENTER:
during operation, press this key to activate the spiral function. During programming,
press to confi rm and memorise the selection.
H) “-” KEY:
during operation, press to stop the blade. During programming, press to decrease
the entries proposed by the menu.
I) STOP/Emergency KEY:
Press to stop the mower safely. Only use in case of imminent
danger and to perform maintenance on the robot.
