Stierius EG 30-60 EPC, Руководство по эксплуатации

Страница: 17 / 42

17
Delivery Status / Installation / Operation start-up
The packing will contain the following parts at the delivery status:
1 Control Assy. (incl. Pressure hose and Power cord)
1 Chassis
4 Mounting Screws
1 Suction tube assy.
1 Adapter no. 20
1 Recovery bottle
(only PRO)
Please check the unit after unpacking for any transportation damage.
Transport damages should be immediately reported to the responsable carrier!
Part Part Description Part Part Description
1 Control assy. 11 Suction tube assy.
2 Pressure hose 12 Sealing cone
3 Pressure hose coupler 13 Unmistakeable nipple for suktion tube
4 Power cord 14 Coupler for suktion tube
5 ON/OFF-Switch 15 Connection low fluid indicator
6 Fuse 16 Container security barr
7 Low fluid level indicator 17 Wheel with cap
8 Self purging nipple 18 Caster cpl.
9 Pressure regulator EPC: /- 19 Adapter No. 20
10 Gauge
PRO-Version:
21 Spiral hose 23 Recovery bottle
22 Pipet 24 Recovery bottle hose
Corrective maintenance / Repair
Corrective maintenance and repair at the unit may only be performed by expert
personal!
The device is designed so in case of any defect only the control assy. must be sent in
for inspection.
In this case:
The mounting screws on the left and right panel must be unscrewed.
Take down the control assy. incl. filling hose and power cord from the chassis.
GB