STIEBEL ELTRON SNE 5 t ECO, Эксплуатация и установка

Страница: 6 / 20

OpEraTiON
Settings
6 | SNE 5 t ECO GB www.stiebel-eltron.com
4. Settings
4.1 Operating lock
To lock or unlock the programming keys, press and hold "+" and
"–" simultaneously for 5 seconds.
4.2 Standard display
The standard display is continuously displayed. If no user action
is performed for longer than 20 seconds while in the menu, the
device automatically switches to the standard display.
The standard display shows the current set temperature as well
as the "Editable parameter" symbol. You can use the "+" and "–"
keys to adjust the set temperature.
If the selected set temperature corresponds to one of the values
set for the comfort, setback or frost protection temperature, the
symbol for the corresponding operating mode (comfort mode,
setback mode, frost protection) appears in the menu bar.
The set temperature can also be changed manually when in timer
mode. The changed set temperature is maintained until the next
programmed start time is reached.
4.3 Standard menu
To access the standard menu, briefly press “Menu”. You can now
call up the following menu items using the “+” and “–” buttons:
Display Description
Select day of the week and time
Select comfort temperature
(factory setting = 65 °C)
Select setback temperature
(factory setting = 45 °C)
Activate or deactivate (off) timer mode (Pro1, Pro2, Pro3)
To change the setting of a menu item, call up the relevant menu
item using "+" and "-". Press "OK".
As soon as the "Editable parameter" symbol appears, you can
change the setting of the menu item with "+" and "–". Press "OK"
to save the setting.
To exit the standard menu, press "Menu". The standard display
appears.
Note
During initial start-up and following prolonged power
supply interruptions (approx. 8 hours), you must set the
day of the week and the time.
4.4 Configuration menu
Display Description
I1-I3 Actual values
Pro1-Pro3 Time programs
P1-P5 Parameter
In the configuration menu, you can call up actual values, program
time programs for timer mode and set parameters.
To access the configuration menu, press and hold "Menu". After
approx. 3 seconds, actual value I1 is displayed.
Use "+" and "–" to switch between the individual actual values,
time programs and parameters.
To exit the configuration menu, press "Menu". The standard dis-
play appears.
4.4.1 Actual values
The following actual values can be called up:
Display Description Unit
I1 Actual temperature [°C] | [°F]
I2 Operating time [d]
I3 Heating time
(counter is reset to 0 after reaching 9999)
[h]
4.4.2 Time programs
There are three time programs available when using the appliance
in timer mode. Time programs Pro1 and Pro2 are pre-configured
at the factory. The Pro3 time program can be set in accordance
with your individual preferences.
Display Description
Pro1 Repeated: Daily
Suitable for private households, for example
Pro2 Repeated: Weekdays
Suitable for workplaces, for example
Pro3 user defined
Note
Ensure the day of the week and the time are set correctly
when setting the time programs.
Note
Timer mode is suspended when ECO mode ("ECO" button)
is activated.
Deactivate ECO mode using the "ECO" button.