STIEBEL ELTRON SBP 100 Скачать руководство пользователя страница 4

OPERATION 

 

Appliance description

24

 | SBP  100 www.stiebel-eltron.com

2.2  General safety instructions

 

WARNING Burns

There is a risk of scalding at outlet temperatures in ex-

cess of 43 °C.

!

 

WARNING Injury

The appliance may be used by children aged 8 and older 

and persons with reduced physical, sensory or mental 

capabilities or a lack of experience and know-how, pro-

vided that they are supervised or they have been in-

structed on how to use the appliance safely and have 

understood the resulting risks. Children must never play 

with the appliance. Children must never clean the ap-

pliance or perform user maintenance unless they are 

supervised.

With immersion heater accessory:

!

 

Material losses

The user must protect the water pipes and safety valve 

from frost.

2.3  Test symbols

See type plate on the appliance.

3.  Appliance description

This pressurised appliance is equipped with a quick-action air vent 

valve and a cleaning aperture with drain & fill valve.
An immersion heater can be retrofitted.

Frost protection with immersion heater accessory

If the power supply is guaranteed, the appliance is also protected 

from frost on the temperature setting "cold". The appliance switch-

es on in good time and heats the water. The appliance does not 

protect the water pipes and safety valve from frost.

4.  Immersion heater accessory: 

Settings

The temperature is variably adjustable.

65°C

1

2

26

�0

3�

01

�0

34

3

1  ON/OFF indicator

2  Frost protection

65 °C maximum temperature setting
Depending on the system, the actual temperatures may vary from 

the set value.

ON/OFF indicator

The ON/OFF indicator illuminates when water is being heated.

5.  Cleaning, care and maintenance

f

f

Have the function of the safety assembly and electrical safe-

ty of the fitted accessories regularly checked by a qualified 

contractor.

f

f

Never use abrasive or corrosive cleaning agents. A damp 

cloth is sufficient for cleaning the appliance.

f

f

Regularly activate the safety valve to prevent it from becom-

ing blocked.

6.  Troubleshooting

Call your qualified contractor.
To facilitate and speed up your enquiry, please provide the serial 

number from the type plate (000000-0000-000000):

Made in Germany

000000-0000-000000

                     

D

00000

48

09

7

Содержание SBP 100





















Отзывы: