INsTALLATIoN
Installation
E10 RKL, Z10 RKL
| 15
ENGL
IS
H
3.3 Standard delivery
The following are delivered with the appliance:
- 2 fixings for top-hat rail mounting
4. Installation
Note
The connected controllers and actuators must match
the connected power supply.
Note
The appliance is suitable for mounting on a top-hat
rail or on the wall.
f
f
To mount the appliance on a wall or directly in the casing
of the heat interface unit, carry out the following steps:
D
00000
76
75
1
f
f
Release the appliance cover at the two locking points. Re-
move the appliance cover.
D
00000
76
75
2
f
f
Align the appliance horizontally.
f
f
Mark and drill the fixing holes.
f
f
secure the appliance with suitable rawl plugs and screws
(Ø 4 mm). Tighten the screws until finger-tight.
D
00000
76
75
3
f
f
Route the power cable through the strain relief into the
appliance enclosure.
f
f
Wire the appliance.
f
f
Fit the appliance cover.
f
f
switch the power supply oN.
4.1 Inserting the fuse
f
f
To insert the fuse, proceed as shown:
T4AH
D
00000
76
75
4
D
00000
76
78
0
5. Removal
f
f
Disconnect the entire system from the power supply.
f
f
Disconnect the wiring to all externally connected
components.
f
f
Remove the appliance.
Содержание E10-RKL
Страница 11: ...DEUTSCH E10 RKL Z10 RKL 11 NOTIZEN...
