STIEBEL ELTRON 223400 Скачать руководство пользователя страница 6

Страница: 6 / 39

iNSTaLLaTiON

Safety

www.stiebel-eltron.com

WPL E | WPL cool |

iNSTaLLaTiON

7. Safety

Only a qualified contractor should carry out installation, commis-

sioning, maintenance and repair of the appliance.

7.1 General safety instructions

We guarantee trouble-free function and operational reliability only

if original accessories and spare parts intended for the appliance

are used.

7.2 Instructions, standards and regulations

Note

Observe all applicable national and regional regulations

and instructions.

7.3 Operation of the appliance in buildings with

combustion equipment

As the appliance can produce negative pressure in the installation

room, we recommend using a tightly sealing door between the

installation room and the living space for operation with com-

bustion equipment.
If, due to its use, the installation room is connected to the ex-

tract air system, you must also allow for a supply air valve in the

installation room in this particular case to prevent any further

increase in the negative pressure in the installation room. The

negative pressure created by the appliance in the installation room

is heavily influenced by the pressure drop in the outdoor air line.

For this reason, the outdoor air line in particular should be as

short as possible.

8. Appliance description

For outdoor installation the appliance offers additional frost pro-

tection of the heating water pipes. The integral frost protection

circuit starts the heating circulation pump in the heat pump circuit

automatically at +8 °C condenser temperature, and in doing so

ensures circulation in all water-filled sections.
The heat pump starts automatically when the temperature in the

heat pump circuit drops below +5 °C.

8.1 Standard delivery

The casing components for the appliance are delivered in a sep-

arate packing unit.

8.1.1 Standard appliance

- Type plate

8.1.2 Casing components – outdoor installation

- Hood – outdoor installation

- Front panel

- Back panel

- Pipe bend for heating circuit flow

- Pipe bend for heating circuit return

8.1.3 Casing components for indoor installation

- Cover - indoor installation

- Front panel

- Back panel

- Pipe bend for heating circuit return

8.2 Required accessories

8.2.1 Outdoor installation

- WPM 3 heat pump manager

- Accessories – outdoor installation

- Pressure hoses SD 25 or SD 32

8.2.2 Indoor installation

- WPM 3 heat pump manager

- Accessories – indoor installation

- Pressure hoses SD 25 or SD 32

8.2.3 Cooling

- Remote control for heating systems FEK

8.3 Additional accessories

8.3.1 Outdoor installation

- Remote control for FE7 heating systems

- Water softening fitting HZEA

- SP cool distributor strip

- Internet Service Gateway ISG

8.3.2 Indoor installation

- Air hose DN 560 x 4 m

- Hose connection panel 560

- Wall outlet AWG 560 H-SR

- Wall outlet AWG 560 H-GL

- Wall outlet AWG 560 V-SR

- Wall outlet AWG 560 V-GL

- Wall outlet AWG 560 L

- Wall outlet AWG 600 L

- Remote control for FE7 heating systems

- Condensate pump PK 10

- Water softening fitting HZEA

- SP cool distributor strip

- Internet Service Gateway ISG

Содержание 223400








































Результаты поиска

Содержание 223400

Отзывы:

Бренды по названию

Популярные бренды

STIEBEL ELTRON 223400, Руководство пользователя

Результаты поиска

Содержание 223400

Отзывы:

Бренды по названию

Популярные бренды