iNSTaLLaTiON
fitting casing components
www.stiebel-eltron.com
WPL E | WPL cool |
19
12.2 Indoor installation
12.2.1 Sealing the appliance
Note
If you want to prevent negative pressure in the instal-
lation room, you can seal the appliance by affixing the
plastic screen provided.
Before fitting the casing sections, seal the appliance by affixing
a plastic film; this will prevent condensation forming under all
operating conditions.
The plastic film is supplied with the casing sections.
26
0
3
01
1
45
6
f
f
Apply fabric tape to seal the hole at the bottom of the frame
on the left-hand side. The fabric tape is supplied with the ac-
cessory "thermally insulated air hose".
26
0
3
01
1
45
4
f
f
Hang the plastic screen with the pre-cut holes onto the hooks
on the appliance.
26
0
3
01
1
45
5
f
f
Remove the backing from the adhesive strips on the frame
and on the plastic screen.
f
f
Secure the plastic screen by pressing it onto the standard
appliance.
f
f
Seal the gaps around the hooks with fabric tape.
12.2.2 Fitting casing components
2
1
3
1
5
4
26
0
3
01
1
44
3
1 Side panel
2 Cover
3 Front panel
4 Type plate
5 Back panel
f
f
Place the cover on the appliance and secure with two screws.
f
f
Hook the side panels, front panel and back panel into the
hooks on the standard appliance. Secure the casing compo-
nents with one screw each.
f
f
Affix the type plate supplied in a highly visible position on
one of the appliance casing panels.
