INSTaLLaTION
Preparation
10
| EIL Premium
www.stiebel-eltron.com
8.2 Accessories
Special aerator
Note
Fitting the special aerator supplied provides an optimum
water jet.
Taps/valves
f
f
Use suitable taps.
Non-pressurised taps
- MAW (OT) Wall mounted tap for oversink installation
- MAZ (UT) Twin lever basin tap
- MAE (UTE) Mono lever basin tap
Pressure-tested taps
Suitable pressure-tested taps are available from specialist trade
shops.
9. Preparation
f
f
Flush the water line thoroughly.
Water installation
No safety valve is required.
10. Installation
10.1 Installation site
Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always ac-
cessible.
The appliance is suitable for undersink installation (water con-
nections at the top) and oversink installation (water connections
at the bottom).
DANGER Electrocution
The adjusting screw for setting the flow rate is 'live', and
the IP 25 protection is only given when the appliance
back panel is fitted.
f
f
Always fit the appliance back panel.