Operating Manual
RC-3030
7
2.7
Dangerous Aspects of the Machine
Every machine, if it is not used according to the regulations, may be hazardous for
operating, setting-up and service personnel. The operating authority is responsible for
compliance with the safety regulations during operation and maintenance of safety devices
supplied with the machine as well as the provision of appropriate additional safety devices.
2.8
Electrical Engineering Regulations
Never start machine in the tilted position. The machine must only be started when all
guards and dust collection parts are attached and machine is standing flat on work
surface.
Work on the electrical parts of the equipment may only be undertaken by a skilled
electrician or by a trained person under the guidance and supervision of a skilled
electrician as well as in accordance with the electrical engineering regulations.
Use only extension cables for extending the main cable that are sized and marked in
accordance with the overall power consumption of the machine and the valid VDE
guidelines. In case there is any question ask the manufacturer or a skilled electrician.
If work on electrified parts is necessary, a second person must be deployed who can pull out the
plug in an emergency. The working area must be sealed with a red and white safety chain and a
danger sign. Use tools that are insulated against voltages.
Only start work, once you are familiar with the electrical engineering regulations that apply to your
area. Only use voltage testers that comply with the regulations when troubleshooting. From time to
time check voltage tester to ensure that they are operationally efficient.
2.9
Special Instructions
Use only proper and default free tools for your work. Damaged tools have to be repaired immediately
or to be replaced.
Use during your work for your own safety the required safety equipment and safety clothes (e.g.
safety glasses, safety shoes, safety gloves).
Please instruct operators and repair personnel about the following points:
• Cleaning and repair work are only allowed if the machine is shut off (safety off position).
• During work on the machine, be certain that the machine cannot be started.
• Opening or removing safety devices while the machine is running are not allowed.
• Replace all safety covers and devices after cleaning, repair, and maintenance work.
• Do not touch moving parts and do not walk into the working path of the machine.
• Before restarting machine, make sure all personnel are a safe distance away from the work
area after initial start up.
