STI PR-8223, Руководство пользователя

Страница: 7 / 29

6
the right side to level the Levelers (28).
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP 3
–
Connection Wire Assembly
a. Plug the Middle Connection Wire (130) into the Lower Connection Wire (131). Be careful not to pinch the wires.
b. Plug the Pulse Sensor Wire 2 (134) into the Pulse Sensor Wire 3 (135). Be careful not to pinch the wires.
S
TEP 4
–
Upright Post Assembly
a. Refer to FIG. 1 , check that 2pcs Nylock Nuts (M10)(126) have pre-assembled into the front of the Main Frame (1)
(they will not be tight so that slotted bracket of the upright post will slide between the nut and the frame).
b. Insert the Upright Post (8) into the Main Frame (1) and secure with 2pcs Bolts (M10xp1.5x50mm)(117) by using the
T-HEAD SOCKET WRENCH as shown. Then fully tighten with 2pcs Nylock Nuts (M10)(126).
S
TEP 5
–
Front Decoration Cover Assembly
Attach the Front Decorative Cover (13) onto the front of the Main Frame (1) with 2pcs Bolts (M5xp0.8x30mm)(100).
S
TEP 6
–
Stationary Handlebar Assembly
NOTE: For shipping purpose, 4pcs Bolts (M8xp1.25x20mm)(104) and 4pcs Lock
Washers (86) are attached on the Stationary Handlebar (9) .
a. Remove 4pcs Bolts (M8xp1.25x20mm)(104) and 4pcs Lock Washers (86) from
the Stationary Handlebar (9) .
b. Insert the Stationary Handlebar (9) into the Upright Post (8) and secure with 4pcs
Bolts (M8xp1.25x20mm)(104) and 4pcs Lock Washers (86) .
NOTE: Do not
remove the Nuts
(126) during
assembly