15
“
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
20
–
Upper Handlebar & Rotator Cuff–Pivoting Arm Assembly
NOTE:
4pcs
Bolts, Hex Head Flange (M8×p1.25×16mm)(177)
are attached to on the rear
of
Right Upper Handlebar (13)
as the draft shown on the right.
a. Remove 4pcs
Bolts, Hex Head Flange (M8xp1.25x16mm)(177)
from the rear of
Right
Upper Handlebar (13)
.
b. Attach the
Right Upper Handlebar (13)
to the
Right Pivoting Arm (15)
and secure with
4pcs
Bolts, Hex Head Flange (M8×p1.25×16mm)(177)
.
c. Place the
Front Rotator Cuff
– Pivoting Arm (63)
and the
Rear Rotator Cuff
–
Pivoting Arm (64)
over the
Right Upper Handlebar (13)
. And fasten the
Covers (63,
64)
together with 4pcs
Bolts, Round Head (M5xp0.8x15mm)(125)
.
d. Repeat the above same procedure for the left side.
S
TEP
21
–
Accessory Tray Assembly
NOTE:
2pcs
Bolts, Round Head (M5×p0.8×30mm)(126)
are attached to on the back of
Upright Post (4)
as the right draft shown.
a. Remove 2pcs
Bolt, Round Head (M5×p0.8×30mm) (126)
from the back of
Upright Post
(4)
.
b. Place the
Accessory Tray Support Pad (41)
and
Accessory Tray (42)
on the
Upright
Post (4)
and secure with 2pcs
Bolts (M5xp0.8x30mm)(126)
.
